Arduino-ESP32 - Step-by-Step Lectures¶
Work through these in order. Each file is one session: read it, do the lab at the end, then move on.
| Lecture | Topic |
|---|---|
| Lecture-01 | What arduino-esp32 is and where it fits |
| Lecture-02 | Supported chips, install path, and first board bring-up |
| Lecture-03 | What is really under the Arduino layer: ESP-IDF, FreeRTOS, and core architecture |
| Lecture-04 | Peripherals, libraries, connectivity, and system design with Espressif boards |
| Lecture-05 | Arduino as an ESP-IDF component and the path from prototype to product |
Turn the five lectures into a measured firmware increment¶
After L1, draw the stack and locate one called function in the pinned source. After L2, save a boot log and exact board/core settings. After L3, record which task runs application work and which callback context delivers a peripheral event. After L4, add a sequence-numbered periodic sample and measure missed samples during a reconnect. After L5, reproduce that behavior in the selected ESP-IDF/component workflow.
A written comparison alone is preparation. The course artifact is a rebuildable project, serial log, queue/drop counters, and a before/after migration comparison. If hardware is unavailable, label source tracing as analysis and leave runtime measurements unclaimed.
Carry forward: Five staged evidence items culminating in a rebuildable firmware project. Continue with the next course and reuse that evidence.