Skip to content

Sensor Fusion

SF

Deep Dive · AI Workloads

Specialized course identity for Sensor Fusion.

Artifact: model or workload study · Measure: accuracy, latency, memory, throughput

Phase 3 — Artificial Intelligence. Multi-sensor calibration, filtering, and fusion (Kalibr, BEVFusion, multi-object tracking). Complements Computer Vision and Neural Networks. Sub-guides that mention Jetson, TensorRT, or ROS2 assume you are also following Phase 4 Track B (Jetson, ROS2).

Hub: Phase 3 — Artificial Intelligence


Start with a working CPU experiment: Camera geometry and delayed sensor fusion executes OpenCV pose recovery and NumPy filtering with a hash-pinned environment. Its measured failures explain why timestamps, target scale, and covariance matter before you add more sensors.

Course sequence: one observation contract

Begin with two sensors and one coordinate transform. Add modalities only after you can explain a residual plot. This sequence replaces calendar-based lists of advanced topics with artifacts the robotics courses can consume.

Step Study Build Passing evidence
1 Kalman filter series A seeded constant-velocity estimator State error, innovation, covariance, and behavior during a dropout
2 Kalibr Camera/IMU calibration manifest Transform direction, units, clock convention, and held-out residuals
3 Multi-object tracking Gated assignment with track birth/death Identity switches and tracking metrics on an unchanged detector
4 BEVFusion Camera/LiDAR feature alignment Same-split modality ablations and measured runtime memory
5 ROS 2 integration Timestamped observation publisher Replay, stale-message rejection, and frame-consistent outputs

Entry knowledge: vectors, covariance, coordinate transforms, and basic Python. Learn linear filtering before EKF/UKF; a UKF is not universally more accurate than an EKF. Each approximates nonlinear uncertainty differently, so compare on the same known trajectory.

Worked error budget

For a pinhole camera near its optical axis, a one-pixel error at depth Z corresponds approximately to Z/f metres, where f is focal length in pixels. At Z=20 m and f=500 px, that is 0.04 m. This is geometry under stated assumptions, not a universal odometry drift rate.

A one-degree orientation error displaces a ray at 30 m by roughly 30*tan(1°)=0.524 m. A 1 ms offset at constant 1 m/s is a 1 mm displacement; angular motion, acceleration, rolling shutter, and filter feedback can change the impact. Test them separately.

Exercise: replay a reference trajectory, inject a known 10 ms timestamp offset, and compare residuals with a one-degree frame error. Predict which residual changes with speed before running the experiment. Carry the timestamp/frame manifest into the VLA observation adapter.

From a good estimate to a usable robot input

Every observation needs a frame ID, units, source timestamp, clock domain, validity interval, and covariance or other uncertainty description where meaningful. Distinguish time synchronization from spatial calibration. A low calibration residual on the fitted sequence does not establish accuracy on a new trajectory.

Use ROS 2 for the integrated robot path. Legacy ROS 1 calibration utilities may run offline in their own pinned environment; document bag conversion and verify timestamp preservation. Calibration outputs can then be consumed by a ROS 2 deployment without treating the calibration tool as a ROS 2 package.

Advanced branches after this gate: factor graphs/VIO, radar, event cameras, or multi-robot fusion. Select one to answer a task-specific failure seen in the baseline. These are extensions, not requirements before the first working VLA loop.

Carry this course into the physical-AI system

Start from: Two timestamped sensors and a known transform convention.

Build and challenge: Work through estimation, calibration, association, then fusion. Inject time offset and spatial error separately so their residual patterns can be distinguished.

Pass forward: A frame/time/uncertainty contract that the robot observation pipeline can validate. Continue with the connected course and keep the artifact in the Physical AI Design Studio.