Skip to content

L40S x12 — Inference Deep Dive

The NVIDIA L40S is a PCIe-based GPU designed for AI inference, graphics, and enterprise workloads. Unlike H100/H200 SXM, it uses GDDR6 memory and connects via PCIe ; compare quality-qualified throughput, latency and complete-system cost for the intended workload.

System Snapshot

Property Value
GPU NVIDIA L40S
Count 12
Memory per GPU 48 GB GDDR6
Total GPU Memory 576 GB
Memory Bandwidth 864 GB/s per GPU
FP8 Tensor Core TFLOPS 733 dense / 1,466 structured-sparse per GPU
BF16 / FP16 TFLOPS approximately 362–366 dense; 733 structured-sparse (see source discrepancy in Chapter 1)
TF32 TFLOPS ~183 TFLOPS per GPU
GPU Interconnect PCIe 4.0 x16 (no NVLink)
Form Factor PCIe full-height, dual-slot
TDP 350 W per GPU

L40S vs H200: When to Choose L40S

Factor L40S x12 H200 x8
Total memory 576 GB GDDR6 1,128 GB HBM3e
Memory bandwidth 10.4 TB/s total 38.4 TB/s total
GPU interconnect PCIe (no NVLink) NVLink 4.0 900 GB/s
Cost Obtain a dated quote for the complete system Obtain a comparable dated quote
Candidate workload Independent models/graphics/inference that fit Larger working sets and communication-intensive layouts
GPU-only maximum power sum ~4,200 W (12 GPUs) ~5,600 W (8 GPUs)
Model capacity Depends on precision, metadata, KV, workspace, and sharding Same accounting; larger aggregate HBM

Evaluate L40S when the model working sets and service requirements fit its memory/communication limits. Make the final choice from measured goodput and dated complete-system costs.

Topic Index

# Topic Description
01 Hardware Architecture Ada Lovelace die, GDDR6, PCIe topology, NVLink absence
02 Inference Optimization vLLM, TRT-LLM, quantization, batching strategies
03 Multi-GPU Strategy PCIe-constrained parallelism, pipeline vs tensor parallel
04 Deployment Guide Multi-instance deployment, model sharding, production setup
05 Benchmarks Feasible configurations, measured goodput, quality and cost accounting

Quick Navigation

Work the placement decision

A 70B BF16 model needs about 140 GB for weights alone, so it does not fit on two 48 GB L40S devices. A 4-bit representation has a 35 GB raw-weight lower bound, then adds scales, unquantized tensors, KV cache, and workspace. The checkpoint format and supported kernel path therefore come before choosing TP=2.

Measure one model group first, then compare multiple replicas with a larger TP group at the same request mix. Twelve devices behind PCIe switches do not form one 576 GB high-bandwidth device. Save a PCIe topology diagram and per-rank memory/latency report for platform evaluation. Datasheet peaks distinguish dense and sparse arithmetic, and 12 × 350 W excludes CPUs, memory, NICs, and cooling. L40S specifications.

Practice and assessment

Entry diagnostic (prerequisite check): Draw the actual PCIe/NIC topology and identify cross-root or cross-node transfers. If this is unfamiliar, use the prerequisite material above or the roadmap diagnostics before starting the lab.

  1. Baseline lab: Compare one serving group and multiple replicas at fixed model/workload.
  2. Guided variation: Increase concurrency and inspect where communication or memory limits scaling.
  3. Independent transfer: repeat the method on a new input or configuration and explain where your original assumptions stop applying.

Evidence to submit: Per-group goodput, latency tails, rank memory, link traffic, and failures. Keep raw results and reproduction steps; distinguish measured results from estimates or work not run.

Self-check: Which observation would disprove your explanation of the result? Identify a competing explanation and the smallest experiment that separates them. A passing answer names a concrete predicted difference, not only another tool to try.

Exit criteria: reproduce the baseline, demonstrate the negative/variation check, and meet the shared completion rubric. Use the lesson cycle for retrieval practice and spaced review.